Instructions on how to install a direct water heater

Installation tools

You need to prepare some of the following tools and supplies to install a direct water heater.

1. Water heater accessories are available with purchase

Toàn bộ máy và phụ kiện kèm theo khi mua

The whole machine and accessories are included with the purchase

2. The materials need to prepare to install the machine (Dien May GREEN supports the preparation for customers)

Các vật tư cần chuẩn bị để lắp máy

Materials needed to prepare the machine

  • Water supply cable.
  • Single-phase electrical circuit breakers 20A or 30A.
  • Daphaco electric wire.
  • Need to buy more flexible hose to fill water into the machine.
  • Installation tools include pencil, electric tester, screwdriver, ruler, wrench, wire cutter and drill.

Steps to take

Step 1: Use a screwdriver to remove the mask of the water heater.

Tháo mặt nạ của máy nước nóng ra

Remove the mask of the water heater

Use a screwdriver to remove the screws to remove the front panel of the water heater, being careful to use the correct type of screwdriver so as not to damage the unit.

Máy nước nóng được tháo mặt nạ ra

The water heater is removed from the mask

Step 2: Put the machine on the wall, use a ruler to make sure the machine is lying flat. Use a pencil to mark the hanger and the holes along the back of the machine.

Dùng thước đặt máy ngay ngắn rồi đánh dấu bằng bút chì

Use a ruler to place the machine neatly and then mark it with a pencil

Take the machine out of position and start drilling holes, close the stopper and then place the machine so that the available holes are aligned with the position of the stopper, tighten the screws.

Bắt vít gắn máy lên tường

Screw the machine to the wall

Step 3: Locate the location to install the shower faucet and CB. Select the appropriate position and then mark the hole with a pencil through the holes on the slider, then proceed to fix the slide position on the wall, screw the screw to complete the installation of the accessory.

Định vị vị trí lắp sen vòi và CB

Determine the location of the shower faucet and CB

Mount the CB on the wall.

Gắn CB lên tường

Mount the CB on the wall

Next, proceed to install the shower on the wall.

Lắp vòi sen lên tường

Mount the shower on the wall

Tighten the faucet fixing screw.

Xiết vít cố định vòi sen

Tighten the showerhead fixing screw

Step 4: We proceed to install the 3-in-1 valve and the water inlet on the right side of the machine. Use a wrench to turn the valve in and then remove the warning stickers attached to the top of the valve, taking care not to drop the loose mesh, the rubber gasket at the top of the valve.

Lưu ý không làm rơi lưới lỏng, gioăng cao su tại đầu van

Take care not to drop the loose mesh, rubber gasket at the valve head

Install the 3-in-1 valve and water inlet on the right side of the machine.

Gắn van 3 trong 1 và tháo miếng dán

Attach the 3-in-1 valve and remove the sticker

Connect the valve end to the water line, the other end to the water supply line. Twist with moderate force so as not to damage the connector.

Dùng ống nhựa nối van 3 trong 1 với van cấp nước

Use a plastic pipe to connect the 3-in-1 valve to the water supply valve

Connect the shower arm to the water outlet on the left front left side of the water heater.

Kết nối tay sen vào đường nước ra

Connect the hand shower to the water outlet

Step 5: Connect the power to the machine

Install the phase wire, neutral wire and ground wire of the machine into the contacts. Make sure the wires are connected correctly and securely.

Kết nối dây điện vào tiếp điểm

Connect the wire to the contact

Connect the machine to the previously mounted CB.

Đấu nối máy với CB đã gắn trước đó

Connect the machine to the previously mounted CB

Finally, proceed to install the front panel on the machine, using the correct screws removed in the first steps. Remove the scratch-resistant screen on the front and then insert the adjustment buttons, need to check if the adjustment buttons fit properly.

Lắp mặt trước máy và lắp núm điều khiển vào

Install the front of the machine and insert the control knob

Installation of the water heater is complete.

Lắp đặt máy nước nóng hoàn tất[

Installation of water heater completed

Step 6: Conduct ground / ground connection for the machine to avoid electric leakage causing danger to users.

Check the machine's operating functions and guide customers to use

Step 1: Check if the ELCB anti-shock CB & other functions on the machine work or not.

Kiểm tra CB chống giật ELCB trên máy có hoạt động hay không

Check if the ELCB anti-shock CB on the machine is working or not

Step 2: Instruct customers to use the machine's function buttons.

Hướng dẫn khách hàng sử dụng các nút chức năng của máy

Guide customers to use the function buttons of the machine

The installation of the direct water heater is completed.

Hopefully the article has provided you with useful information to install a water heater quickly and efficiently. Please leave a comment for Dien May XANH in the box below!

Article using Ariston IM-4522EP water heater 4.5kW

The post https://meo.tips/using/instructions-on-how-to-install-a-direct-water-heater/ appeared first on Meo.tips.

View more from Meo.tips:

Refrigerator is open, does not close tightly: Causes, harm and solutions
Six steps to iron your shirt faster and flatter
Ten effective financial management tips for your family you should refer to
Why are sea crabs tied with large, hydrated ropes when sold?
How to calculate the power consumption of the refrigerator simple and accurate
With their angelic voices and handsome features, the sisters are infatuated with ASMR YouTubers.
Youtuber gives massage instructions to help U40 skin look like it's only 20
Why the refrigerator compartment has a light and the freezer compartment does not?
Applications to check air pollution
Indispensable products and items to prevent COVID-19
What blood pressure reading is normal? Factors that affect your blood pressure
What is blood pressure measurement? Why measure blood pressure? How to measure blood pressure accurately
Ten great tips from little-known lemon peels
Inspiring and motivating modern women quotes
Six very skillful and sincere ways to comfort others
How to fix a super-speed kettle when there is a problem
Treat wrinkled skin with natural foods
Tips to remove odors in clothes when it rains for a long time
Can children watch ASMR videos? Five ASMR youtube channels for kids
What is Black Garlic? What are the health benefits of black garlic?

Nhận xét

Đăng nhận xét

Bài đăng phổ biến từ blog này

Pig Is as Precious as Ginseng and Bird’s Nest: Eat a Lot without Fear of Getting Fat

Hình ảnh
When going to the market, most people usually only care about buying pork belly, pork shoulder or pork butt. Rib meat is also a popular choice. However, in reality, this meat only accounts for about 200g on the pig’s body. Although small in quantity, this meat is considered the best in pork, with a delicious, nutritious and valuable taste like thousand-year-old ginseng. When buying rib meat, there are some points to note: Rib meat is very rare, so if you want to buy it, you should go to the market early or even contact the seller in advance to ensure availability. In particular, when choosing, you should pay attention to the following characteristics: The surface of the rib meat should be dry, not wet. If you feel the meat is moist or there is evidence of water, it may be due to water injection or it is too frozen. The color of the meat should be bright, pink, with no signs of darkening. The meat should not have an antibiotic smell, not be watery or lose its elasticity. H...
Đọc thêm

Pork Contains Harmful Pathogens That Many Vietnamese People Love – A Must-Buy at Any Market

Hình ảnh
Why experts advise people not to eat pig neck? Dr. Luu Thanh Thanh (China Agricultural University) said: Pork neck is the dirtiest part of the meat, it is where the lymph nodes are located. Lymph nodes contain a large amount of white blood cells. These are cells that protect the body by eating harmful substances, bacteria, and dead cells. Therefore, it contains many bacteria, viruses, and germs. The worrying thing is that these germs cannot be completely killed even when cooked at a temperature of 100 degrees Celsius. If consumed, it can easily cause infection. Not to mention, pig neck also contains the thyroid gland. This is the place where the hormone thyroxine is secreted. Consuming too much of this substance can disrupt metabolic processes. From there, it leads to the phenomenon of vomiting. In addition, this hormone is very stable and difficult to destroy even when cooked at high temperatures. And no matter how it is processed, the hidden risk cannot be eliminated. Moreover, ...
Đọc thêm

Children with these 3 traits grow up to be exceptionally intelligent, and parents are grateful, don’t rush to criticize their child’s appearance.

Hình ảnh
The intelligence and success of a child when they grow up largely depends on family education, school education, and the learning process. However, there are some babies who show signs of being very smart and agile even from birth. According to some feng shui masters and physiognomists, you can predict the fate of a child by looking at their appearance. Although many people do not believe in it and of course, not everything has absolute value, but looking at a person’s appearance to predict their personality and destiny has been of great interest and worth referring to since ancient times. According to physiognomy, children who are born with these features will be intelligent, quick-witted, and clever as they grow up. Children with broad foreheads A broad forehead, especially in girls, sometimes makes parents think, “Oh, my child has a broad forehead, I should cover it with bangs.” But according to physiognomy, a broad forehead symbolizes wealth and intelligence. T...
Đọc thêm