Handling electrical equipment when exposed to water
1 Do not rush to plug in and turn on the device
If you know for sure that electrical equipment is damp, absolutely do not plug it in and turn it on because doing so can cause a shortage in the household electrical system or blow the fuse inside the machine, damaging the internal components.
Complicated devices such as TVs, … need to be raised, removed, and dried depending on how long the immersion is in the water.
2 Clean, dehumidify and dry the device
With clean water, people need to put it in the drying cabinet, let it dry, and if the water is dirty, it should be washed first because if there is residual mud, even if it dries after a while, it will absorb moisture and damage the device.
If the house has air conditioning or a dehumidifier, you should close the door, turn on the air conditioner or use a dehumidifier to dry the machine before use.
After drying, and cleaning the equipment should not be reinstalled immediately, but left in a dry place for at least 24 hours so that there is no condensation, then install.
If not, you can also use a dryer to dry the outside. Note that absolutely do not use a hot hair dryer to dry because this will lead to damage to the components inside the device.
A person with technical knowledge can remove the appliance cover for drying, but this is not recommended by the manufacturer. Best in case electrical equipment gets into the water you should bring to electrical engineering centers to solve thoroughly.
3 Notes to avoid damage to the device
Attempting to dry and then operate electronic devices again after being exposed to water can cause a short circuit, or worse, an electric shock to the user.
There are many cases of users being injured or life-threatening because the electronic components inside the device still contain a lot of moisture.
The extent of water damage to the water depends on the part that was soaked in water and how long it took to soak in the water.
In fact, even if the heating or cooling equipment is dry, it is likely that the internal components have been damaged or must be replaced for safety.
When the room is flooded, the first thing to do is to prevent the household appliances from coming into contact with water. Then, wait until the water recedes before disconnecting them from the power source.
Never do this while standing in the water. The user should then have a technician or qualified person check it out.
When electrical equipment is exposed to water, it will help you somewhat minimize the damage and unfortunate risks. Share other great tips for everyone to know right below in the comments!
The post https://meo.tips/family/handling-electrical-equipment-when-exposed-to-water/ appeared first on Meo.tips.
View more from Meo.tips:
6 common problems in electronic pressure cookers – Causes and solutions14 ways to help your refrigerator always save electricity
Not because of the weather, here are 4 habits that make freshly washed hair sticky
White wild sunflowers: Origin, meaning and how to grow
14 awesome beauty tips you'll wish you knew sooner
8 benefits from 5 minutes of jogging every day
12 effective and safe ways to prevent theft for the family
How to effectively deodorize shoes in 3 notes
What is hail? Why is there hail?
How to make wallpaper, how to change wallpaper Android, IOS simply
Five ASMR videos on the topic of tapping are very cool and comfortable
Buy quality goods with peace of mind by checking the code on Zalo
Four simple ways to find music on Tik Tok, you can find any song you see
Flower Tofu – The quintessence of Chinese cuisine makes many people surprised
The truth about leftovers in the refrigerator cause cancer
Some common error codes in Electrolux washing machines and how to fix them
How to clean up to keep the kitchen clean and beautiful on Tet holidays?
How to use the grill function of the microwave oven to bake food
7 notes when using a foot bath
Simple tricks to keep your clothes clean
Nhận xét
Đăng nhận xét